Studiomaster Professional AQUA Series Instruction Manual page 4

11. Signal LED: Indicates the incoming signal. This led glows when the Pre fade signal reaches to -20dB.
12. PFL Switch: When pressed t his sends signal from input channel to the headphone as well as bargraph. As this signal is pre
fader it is possible to listen to the signal or monitor on bargraph with fader fully down before it is routed to main or group output.
16
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
13. G1-G2 Switch: This switch is used to route the channel signal to Group (G1/G2) output.
14. Channel Fader: This fader is used to set the level of incoming signal to the Main/Group outputs. It provides a visible indication
of channel level. Normal operating position is at "0"; however you have an optional headroom of +10dB.
15. L-R Switch:
This switch is used to route the channel signal to main (Left/Right) output.
18 17 27
38 19
23 25
22
35
36
33
31
32
21
43
20
44
42
41
37
30
34
28
29
26
40
39
24
2