Teisco Interface User Manual page 3

Teisco Interface on a Pedalboard (STEREO)
If you own two amplifiers, try running stereo
effects for epic results.
Connect both Output A and Output B to your
amplifiers while running a stereo plugin. To take
things further, you can also connect other
stereo pedals before or after the Teisco
Interface and experiment from there.
You may also run other pedals before or after
the Teisco Interface for the desired effect. You
can also run a mono input into the Teisco
Interface and process output in stereo.
DAW requirements:
Create 1 STEREO track in DAW
Add stereo plugins to the track as desired
Use one of these settings in your DAW:
Track 1: Input 1, Stereo Out (if you're NOT
running stereo effects before the Teisco
Interface)
or
Track 1: Input 1+2, Stereo Out (if you're
running stereo effects before the Teisco
Interface; see below)