Connecting Simulator To The Ultraportable - CAE Healthcare lntuity LearningSpace Ultraportable Getting Started Manual

Connecting Simulator to the Ultraportable

Connecting a simulator is done the same way independent of which mode Ultraportable is used in.
1. Click the System module.
2. Switch to the Simulators tab.
Cogwheel
3. Click the cogwheel of the Wireless Bridge you want to connect.
The Wireless Bridge Settings pop-up window opens.
Connect button
905K463152 v2.0
LearningSpace Ultraportable Getting Started Guide
Modules in Ultraportable stand-alone mode
Wireless Bridges
Simulator tab in the System module
Wireless Bridge Settings pop-up window
System module
Simulators listed
Wireless Networks
drop-down
17