FLAVIA CREATION 150 Restart Instructions

BREWER RESTART
INSTRUCTIONS
For FLAVIA brewers that have been left idle during the
quarantine period, we are recommending the below
procedure to flush the brewers. How-to videos with restart
instructions are available at LavazzaPro.com
CREATION 150
Remove the cold tank from the back of the brewer. Dump
:01
the existing water from the cold tank and rinse the tank.
Refill the tank to the max fill line and place the tank back on
:02
the brewer.
Place a 10 oz cup on the drip tray and press and hold the hot
:03
water button to dispense a cup of hot water. Dispose of the hot
water and repeat this step a total of three times.
CREATION 200
Remove the drip tray and cup surround molding. Please use a pitcher
:01
or small bucket to catch the water.
Turn off the brewer using the switch located on the back panel.
:02
Drain the water from the cold tank and replace the white drain plug,
cup surround molding, and drip tray. If this is a pour over brewer,
drain the cold tank completely, replace the cold tank drain plug, and
refill through the cold tank through the fill lid. If the brewer is
plumbed in, turn the brewer on and the cold tank will refill.
Place a 10 oz cup on the drip tray and press and hold the hot water
:03
button to dispense a cup of hot water. Dispose of the hot water and
repeat this step a total of three times.