Do you have a question about the Creation 400 and is the answer not in the manual?
Questions and answers
Jaime
March 31, 2025
Pack eject timeout
1 comments:
Mr. Anderson
March 31, 2025
The "PACK EJECT TIMEOUT" for the FLAVIA Creation 400 is an error message indicating that the machine failed to eject the pack within the expected time. If this problem occurs, users are instructed to enter the Operator Menu (refer to pages 2/3 of the manual) to troubleshoot, and if the problem recurs, to call Customer Service.
Page 3
70-41-2651 iss4 UK C400 User Guide.qxd:OPS Guide US CAN Amend.qxd 1/5/09 15:25 Page 4...
Page 4
PAGE Safety Precautions Brewer Layout Setting up your FLAVIA® Brewer 2, 3, 4, 5 Preparing a FLAVIA® Beverage/Drink Daily care of your FLAVIA® Brewer Weekly care of your FLAVIA® Brewer Draining your Brewer Beverage/Drink Options Troubleshooting 10,11 Safety & Installation Guidelines...
Page 5
If the fuse cover is lost or damaged a replacement can be obtained by contacting customer service or your local FLAVIA® supplier. Ensure the replacement cover is the same colour as Never place outside. This system is for indoor use only.
Page 6
Do not locate the water supply above the mains power socket. • We draw your attention to the requirements of the Water Supply (Water Fittings) Regulations 1999. Installing Please contact customer service or your local FLAVIA® supplier for your brewer to be installed.
Page 7
Ensure that the machine is kept on a level surface. • This system is for indoor use only. Never place outside, or allow to freeze. If freezing occurs contact customer service or your local FLAVIA® supplier. Plumbed-in - Connect Jug filled - Fill via filler lid •...
Page 8
‘Free Vend’ local FLAVIA® supplier • Please contact customer service or your local FLAVIA® supplier in the event of a lost or forgotten password Press all selection buttons to check movement. If problem •...
Page 9
However, if faults do develop, you can resolve many of them yourself. PROBLEM REASON SOLUTION 1. The use of FLAVIA® paper cups is recommended. Alternative cups may be used providing they are of similar proportions to ref. H and weigh a minimum of 5g “EMPTY BIN” message Filterpack bin is full Pull out and empty the filterpack 2.
Page 10
70-41-2651 iss4 UK C400 User Guide.qxd:OPS Guide US CAN Amend.qxd 1/5/09 15:26 Page 18 D R A I N I N G Y O U R B R E W E R P R E P A R I N G A B E V E R A G E / D R I N K Draining is recommended before moving the brewer.
Page 11
Notice • If filterpack bin fills right up, the “check bin” message will be displayed • If your FLAVIA® brewer is on a base unit, the “check bin” message will not be displayed Notice • Remove filterpack door to access air...
Need help?
Do you have a question about the Creation 400 and is the answer not in the manual?
Questions and answers
Pack eject timeout
The "PACK EJECT TIMEOUT" for the FLAVIA Creation 400 is an error message indicating that the machine failed to eject the pack within the expected time. If this problem occurs, users are instructed to enter the Operator Menu (refer to pages 2/3 of the manual) to troubleshoot, and if the problem recurs, to call Customer Service.
This answer is automatically generated