Setting The Solar System - Hamworthy Trigon ST1 Installation, Commissioning, Operation & Service Instructions

4.4

Setting the solar system

1. Adjust the desired rotation speed of the solar circuit pumps depending on the required flow
rate. The equalizing valves mounted to each collector field allow for an exact adjustment of
the flow rate. The equalizing valve of the main collector allows you to adjust the overall flow
rate in the installation.
2. The flowmeter in the extension station for Solerio Transfert ST1 only serves to display the
flow rate.
3. For the correct adjustment, observe the adjustment values of the flow rate.
4. Fix the insulating front shells of the solar stations.
5. Switch the controller to automatic mode (see controller instructions).
Left scale:
1-13 /min
Reading edge =
Top edge of the turbine
Example:
about 10 l/min
14/20 Installation-Operation Extension Station ST1 TOP - Copyright by Hamworthy
4 Commissioning [specialist]
Right scale:
15-20 l/min
Reading edge =
Bottom edge of the
turbine.
0DNO0202