Date And Time Settings; Date And Time Settings; Setup; Setting The Time Zone - Olivetti d-Copia 18MF Setup Manual

Date and Time Settings

System Menu/
Counter
or
Date/Timer Set
Enter
or
Time Zone
Enter
NETWORK SCANNER SETUP GUIDE

2 Setup

Setting the Time Zone

You can also make this setting using the COMMAND CENTER. For details on
COMMAND CENTER, refer to Accessing COMMAND CENTER on page 7.
1
Access Time Zone.
2
Press or
3
Press Enter. The message display shows Completed and returns to the Date/
Timer Set. screen.
4
Enable Summer Time if needed - refer to Summer Time Setting on page 3.

Summer Time Setting

Follow these instructions to turn the summer (daylight saving) time setting on and off.
NOTE:
This setting is valid only in areas where summer time is observed.
1
Press or
2
Press Enter.
3
Press or
4
Press Enter. The message display shows Completed and returns to the Date/
Timer Set. screen.
5
Enter the Date and Time - refer to Setting the Current Date and Time on page
4.
to select the time zone that you are in.
to select Summer Time.
to select either On or Off.
3