Page 2
Congratulations on purchasing the: Custom 50 SA112 Combo BY HIWATT We recommend you record your serial number in the spaces provided below for future reference: Serial Number: ____________________________________ Date of Purchase: Store Purchased from: Store Telephone Number: If the unit purchased develops a fault, you will need to contact the store you purchased the unit from.
Page 3
Not all amplifiers are the same! Not all amplifier manufacturers are the same either! We at Hiwatt believe that a goodly proportion of profits should be channelled into R&D rather than into the pockets of management companies demanding payments for endorsements. This way, we keep our standards high...
Page 4
Features: - 2 Input Channels (1 High, 1 Low) With independent volume controls. - Master Volume - Bass, Middle, Treble and Presence EQ controls. - Mains Switch & Standby Switch - IEC mains lead input (See Back Panel) - Variable Impedance Selector (See Back Panel) - Variable Voltage Selector (See Back Panel) - 2 Parallel ¼”...
Page 5
A. PLEASE read this instruction manual carefully before switching on. B. ALWAYS use the supplied mains lead, if a replacement is required please contact your authorized HIWATT Dealer. C. NEVER attempt to by-pass the fuses or fit ones of the incorrect values.
Page 6
Do NOT switch the amplifier on without the loudspeaker(s) connected. ➲ Note: This equipment has been tested and found to comply with the requirements of the EMC Directive (Environments E1, E2 and E3 EN 55103-1/2) and the Low Voltage directive in the E.U. ➲...
Page 7
Impedance Information: Before you decide to connect your SSH to your speaker cabinet, you will want to know about impedance first! Impedance is the electronic load that the speaker puts on the power amplifier and is measured in Ohms. (Ω) Rule of Impedance: When two speakers are wired, “parallel”...
Need help?
Do you have a question about the Custom Series and is the answer not in the manual?
Questions and answers