Lint Screen; Lint Removal - Whirlpool LE7000XM Use & Care Manual

Lint screen
Clean the lint screen before each load. A screen blocked by lint can
Increase drying time and may be a FIRE HAZARD
Open the Ild and pull the lint screen
ROLL the IInt off the screen
straight out
with your fingers
0
DO NOT run the dryer with
DO NOT rinse or wash the screen
the lent screen loose.
Push the screen firmly bock tnto
damaged or mtsslng
;lluce
Doing so can cause over-
heatrng. can damage fabrrcs and
can be a FIRE HAZARD.
Lint removal
Lint can gather Inside the dryer and create a fire hazard This lint
should be removed every 2 to 3 years, or more often, depending on
dryer usage.
ELECTRIC DRYERS
Cleaning should be done only by a qualified person.
0
l
Avoid electrical shock
1.
Remove back panel (electnc) or
hazard - unplug power
front panel [gas)
supply cord or turn off 2. Avoid damaging wires, ther-
electrical power. mostats. funnel or igniter
l
Avoid injury or damage - do not
3. Remove lint from shaded area -
aut hands inside cabinet.
see art - with a soft brush or
l
Make sure dryer is cool.
vacuum cleaner
4. Replace panel reconnect and re-
level dryer