Drying Tips; Fluff Air Setttng; Mixed Loads; Tumble Press Setting - Whirlpool LE7000XM Use & Care Manual

Drying tips
FLUFF AIR
The dryer does not heat when the
Temperature Selector is set on FLUFF
AIR. This setting can be used to fluff
bedding, plastic tablecloths, foam
rubber pillows, stuffed toys, sneakers,
etc.
1. Set Temperature Selector on
FLUFF AIR.
2. Turn Control Knob to the number
of minutes you want in the
PERMANENT PRESS Cycle.
3. Push START button.
Mixed loads
When drying a load with different
kinds and weights of fabric;, use the
cycle suggested for the lightest
fabrics. When the dryer stops, remove
dry items and reset the control.
TUMBLE PRESS" Setting
The TUMBLE PRESS setting removes
wrinkles from dry clothing such as
items that may have been packed
in a suitc:ase, closet, or items not
removed from the dryer.
-r
1. Set Ternperature Selector on HEAVY
HIGH.
2. Set Control Knob on TUMBLE PRESS.
3. Push START Button.
The load will tumble in heated air
for 5 minutes. The heat shuts off and
the dryer continues to tumble the
load for 10 more minutes.
For best result&TUMBLE PRESS only
a few items at a time. Put them on
hangers or fold them as soon as the
dryer stops.
Drying times
Drying times will vary depending on.
l
amount of moisture in the clothes.
9 type and weight of the fabric.
l
size of the load.
l
room temperature around the
dryer.
l
temperature of the wash rinse
water.
l
amount of lint in the lint screen.
l
dryertemperature selection.
See page 6 in your"Dryer Guide"
for more information.
7