Temperature
Selector
is set on FLUFF
AIR. This setting can be used to fluff
bedding,
pillows and clothing
or to
dust drapes.
It can also be used to damp-dry
heat sensitive
itemssuch
as plastic
shower curtains,
rubber-backed
rugs, plastic tablecloths,
foam rubber
pillows, stuffed toys, sneakers,
etc.
1. Set the Temperature
Selector to
FLUFF AIR.
2. Set the Control Knob to the PERMA-
NENT PRESS Cycle
and select the
number
of mintues you want,
3. Push the START Button,
Mixed loads
When drying
a load with different
kinds and weights
of fabrics, use the
cycle
suggested
for the lightest fab-
rics. When the dryer stops, remove
dry
items and reset the control.
The TUMBLE PRESS setting removes
wrinkles
from dry clothing
such as
items that may have been packed
in a suitcase,
closet, or items not
removed
from the dryer.
1. Set Temperature
Selector to PERM’T
PRESS/HEAVY HIGH.
2. Set Control Knob to TUMBLE PRESS.
3. Push START Button.
The load will tumble
in heated
air
for 5 minutes. The heat shuts off and the
dryer continues
to tumble the load
for 10 more minutes.
For best results, TUMBLE PRESS only a
few items at a time. Put them on hang-
ers or fold them as soon as the dryer
stops.
Drying times
Drying times will vary depending
on:
l
amount
of moisture
in the clothes.
l
type and weight
of the fabric.
l
size of load.
l
room temperature
around
the dryer.
l
temperature
of the wash rinse water.
l
amount
of lint in the lint screen.
l
dryer temperature
selection.
See your “Dryer Guide”
for more
information.