BenQ AQCOLOR SW Series User Manual page 22

And place the Hotkey Puck G2 on the monitor stand or
to another desired place as illustrated.
For more information on Hotkey Puck G2, see
Puck G2 and its basic
7. Connect the power cable to the monitor.
Plug one end of the power cord into the socket labelled
on the rear of the monitor. Do not connect the
other end to a power outlet just yet.
8. Organize the cables.
Route the cables via the cable management hole.
9. Connect-to and turn-on the power.
Plug the other end of the power cord into a power
outlet and turn it on.
Picture may differ from product supplied for your region.
22 How to assemble your monitor hardware
operations.
Hotkey