Advertisement
Quick Links
THOR200
Thank you for purchasing a PAP machine and trusting in our experience.
This will let you achieve and experience flight in a very simplistic form
and let those childhood dreams of flight become a reality. If you do not
want this dream to become a nightmare then please read and understand
fully the following recommendations about its operation and use. Enjoy
your machine and always respect the flight rules.
PARAMOTOR
USER MANUAL
Advertisement
Related Manuals for P.AP. Team THOR 200
Summary of Contents for P.AP. Team THOR 200
- Page 1 THOR200 PARAMOTOR USER MANUAL Thank you for purchasing a PAP machine and trusting in our experience. This will let you achieve and experience flight in a very simplistic form and let those childhood dreams of flight become a reality. If you do not want this dream to become a nightmare then please read and understand fully the following recommendations about its operation and use.
- Page 2 If the fuel circuit is empty we will have to pump (fig 14) so that the gasoline rises reaching the carburetor inlet and therefore filling up the circuit. Pump 3 times to enter the correct amount of fuel in the carburetor (see manual POLINI THOR 200, CARBURETOR PWK).
- Page 3 4º) Take the safety position as pictured (fig 21) (fig 22). 5º) Use a gentle progressive and firm tug (fig 23); a strong pull is unnecessary because the Polini Thor 200 starts easily. 6º) Once started take the throttle to have the engine under control at all times. Allow the engine to run slowly for a few seconds at idle and turn it off.
- Page 4 The wrap is so that the tape is always in a forward position which makes it easier to grab when the engine is on your back. (fig See manual of the Polini Thor 200 For information about the running of the engine, fuel recommended, reductor oil, maintenance, warranty, etc.
- Page 5 ASSEMBLY PROPELLER POLINI THOR 200 & THOR 250 Like this we receive the engine. We place the central bolt for the propeller support. We place the central bolt for the propeller support. We place the 6 propeller screws without tightening them.
- Page 6 ASSEMBLY PROPELLER POLINI THOR 200 & THOR 250 Fasten *anti clockwise while we hold the propeller with our other hand. Ready for flight. Its normal that there is small space no Fasten the 6 screws of the carbon propeller at 0.8 Kgm (8Nm).