Download  Print this page

Using Tumble Press; Using Damp Dry; Lint Signal - Whirlpool LE5720XS Use And Care Manual

Large capacity automatic dryes
Hide thumbs

Advertisement

3 P
'5
/ =- \ \
Using TUMBLE PRESS
The TUMBLE PRESS setting removes
wrinkles from clothing that has been
packed in a suitcase or cbset. and
from items not removed from the dryer
at the end of a cycle.
1.
Set the Cycle Control Knob on
TUMBLE PRESS.
2. Set the Temperature Selector on
PERM'T PRESS HEAW HIGH.
3. Push the Start Button.
The bad will tumble in heated air for
10 minutes. Then the dryer will tumble
the clothes for 10 more minutes
without heat.
For best results, put only a few
items at a time in this cycle. As soon
as the dryer stops, put the items on
hangers or fob them.
Using DAMP DRY
Use this setting to dry damp items that
do not require an entire drying cycle,
or to dry kerns to damp level. (Two
examples are heavy cottons, such as
jeans, whii
you do not want to
become stiff, or cotton clothes which
are easier to press when damp.)
1. Set the Cycle Control Knob on
DAMP DRY.
2 Push the Start Button.
The dryer tumbles the bad with heat
for 20 minutes, then without heat for
10 minutes.
Lint signal
Clean the lint screen before each
load. A signal will sound if you neglect
to dean your lint screen. The signal
(a whistle tone) lets you know the air
flow is restriied. Restricted air flow
reduces drying effiiiency.
Turn off the dryer and clean the lint
screen as shown on page 9.

Advertisement

loading

  Also See for Whirlpool LE5720XS

  Related Manuals for Whirlpool LE5720XS

This manual is also suitable for:

Lg5721xs