NEC N8190-163 User Manual page 47

４.
Install this product in the PCI slot as following the instructions described in the user's guide of
the computer.

The method of installing and removing the PCI card and the location of the PCI
Check
slot differ in different computers. Please read the user's guide of the computer
for confirmation.

If this product is not correctly connected to the PCI slot of the computer, remove
the product and connect it again. Using excessive force can lead to damage.
５.
Replace the two SFP+ modules removed in item 3.

Return its lever to the home position, and then insert SFP+ module until you
hear it click.
Notice

If the SFP+ module is not correctly inserted to this product, remove the
product and connect it again. Using excessive force can lead to damage.

After insert all SFP+ modules, put dust covers to them.
(1)
６.
Replace the cover and components removed in item 2. (Take care not to conflict the SFP+
module with the cover edge.)

If the SFP+ module conflicts with the cover edge, remove the product from PCI slot
and connect it again.
Tips
７.
Plug the power cord of the computer into the electrical outlet.
(2)
- 45 -