Bolens BL150 Operator's Manual page 5

SAFETY
AND _NTERNAT_ONAL
SYMBOLS
This operator's manual describes safety and international symbols and pictographs that may appear on this product.
Read the operator's manual for compHete safety, assemMy, operating and maintenance and repair information.
SYMBOL MEANING SYMBOL
SAFETY ALERT SYMBOL
Indicates danger, warning, or
caution. May be used in conjunction
with other symboHs or pictographs.
WARNING - READ OPERATOR'S
MANUAL
Read the Operator's Manual(s) and
follow aH warnings and safety
instructions. FaiHureto do so can
resuHtin serious injury to the
operator and/or bystanders.
I
MEANING
,, THROWN OBJECTS AND
ROTATING CUTTER CAN CAUSE
SEVERE iNJURY
WARNmNG: Donot
operate without the cutting
attachment shieHd in pHace. Keep
away from the rotating cutting
attachment.
ON/OFF STOP CONTROL
ON / START / RUN
WEAR EYE AND HEARING
PROTECTION
WARNING: Thrown
objects and loud noise can cause
severe eye injury and hearing loss.
Wear eye protection meeting ANSI
Z87.1-1989 standards and ear
protection when
operating this unit. Use a full face
shield when needed.
0
ON/OFF STOP CONTROL
OFF or STOP
,, HOT SURFACE WARNING
Do not touch a hot muffler or
cylinder. You may get burned. These
parts get extremely hot from
operation. When turned off they
remain hot for a short time.
', KEEP BYSTANDERS AWAY
WARNmNG: Keepa,
bystanders, especially children and
pets, atleast 5 0 feet (I 5 m.)fromthe
operating area.
1 2 3
1',1
• CHOKE CONTROL
I ,, FULL choke position
2, PARTIAL choke position
3 o RUN position
UNLEADED FUEL
Alwaysuse clean, fresh unleadedfuel.
', OIL
Refer to operator's manual for the
proper type of oil.