Advertisement
4 Operation
Installation of this kit requires the following software versions installed in the windrower:
•
Harvest Performance Tracker (HPT) software: Install_SPW_HPAH203586K_.efs or newer
•
Master Controller software: MCAH203587M.ida4 or newer
1. Turn ignition ON. HPT will display auger header (A) as
attached.
2. Press soft key 5 on the HPT to open the main menu (A),
or press SHIFT and SELECT on the ground speed
lever (GSL).
3. Using the HPT scroll knob, navigate to setup (B), then
header setup (C). The HEADER SETUP page opens
and displays a list of different headers.
4. Select the header type currently attached to the
windrower: Auger or GSS Auger (A). A new
page opens.
NOTE:
The attached header always appears first on the list.
214679
Figure 4.1: HPT Screen Display
Figure 4.2: HPT Screen Display
Figure 4.3: HPT Screen Display
13
Revision B
Advertisement
