Advertisement
Lint screen
The lint screen
is inside the dryer
drum, on the
back wall. Clean
it before
each
load. A screen
blocked
by lint
Pull straight
can increase
out.
drying
time.
1. Use the finger
holes to pull the lint
screen straight
out.
2. Lightly
squeeze
the
body,
as
shown, while pulling
the cover off.
3.
4.
5.
Roll lint off the
screen with
your fingers.
DO NOT rinse
or wash the
screen.
Wet
lint is hard to
remove.
Squeeze
body;
pull cover off.
Replace
the cover
on the body
of
the lint screen.
Push the lint screen
straight
back
in until it clicks into place.
Lint removal
Lint can gather
inside the dryer and create
a FIRE HAZARD. this lint
should
be removed
at least every 2 to 3 years, or more often, depending
on dryer usage.
ELECTRIC
DRYERS
GAS DRYERS
eaning
should
be done only by a qualified
person.
1. Remove
back
panel
(electric)
or lower access
panel
(gas].
2. Avoid damaging
wires,
thermostats,
funnel or igniter.
3. Remove
lint from shaded
area -
see art-with
a soft brush or
vacuum
cleaner.
4. Replace
panel;
reconnect
and
re-level
dryer.
Advertisement
