Whirlpool LE4440XW Use And Care Manual page 5

1.
Select a cycle by turning the Cycle
Control Knob either way. Stop
when the indicator on the knob's
outer ring points to the cycfe and
time you want. See pages 6-6 for
further cycle information.
2. Set the Temperature Selector
on
the desired temperature setting.
3. Push the Stat-t Button to start
the
dryer.
To stop and restart the dryer
l
Open the door or turn the Cycle
Control Knob to OFF to stop the
dryer.
l
Close the door, select a cycle (if
necessary) and push the Start
Button to restart the dryer.
The Cyde Control Knob should point
to an OFF area when the dryer is not
in use. K the dryer is stopped before
the cycle is finished, turn the Cycle
Control Knob to an OFF area
c;