Advertisement
Brought to You by Augusta Flint
Prior to operation of your Pedal Car - Go Cart make certain to apply oil to any moving parts. Oil should be
applied to the Wheel Bushings, the Axles, and down into the Steering Column.
The Pedal Car - Go Cart is moved forward or in reverse by pushing on the pedals. To slow down and stop the
Go-Cart, pull up on the Brake Lever. It will push against the Wheel causing it to slow down and stop-see
Figure 3.
Warning:
Maintain a low speed for safety.
Warning:
Maintain caution when turning and avoid exceedingly sharp turns. Sharp turns
may cause the Go-Cart to tip over, resulting in serious harm to the rider and possibly damaging the Go-Cart.
Lubrication:
For average use, lubricate regularly. Lubricate more frequently with increase in use.
STORAGE:
Store in a dry place to avoid rust and corrosion.
IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE
When unpacking your Manual Pedal Car Go-Cart, check to make sure the following parts are included. If any
parts are missing or broken, please call HARBOR FREIGHT TOOLS at 1-800-444-3353.
Part #
Description
A
Main Body
B
Front Handle Assembly
C
Seat
#42822
Operation
Figure 3
After Operation-Maintenance
,
Unpacking
UNPACK AND CHECK CONTENTS
Quantity
Part #
Description
1
D
Wheel
1
E
Assembling Hardware
1
F
Assembling Hardware
G
Sprocket Assembly
(includes: sprocket, bearing, shaft and seal)
REV 11/04
Brake
P
C
- G
DO NOT OPERATE THE
EDAL
AR
Quantity
4
1
1
1
-C
.
O
ART
Page 4
Advertisement
