Advertisement
Brought to You by Augusta Flint
THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the
owner's record below:
Model______________
SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the entire
manual to become familiar with the unit BEFORE you begin assembly.
Tool Name:
Item Number:
Wheel Base:
Front Track:
Rear Track:
Ground Clearance at Pedal:
Tire Size:
Steering Wheel Size:
Seat Height:
Overall Dimensions:
Handle Bar Width:
Handle Bar Height:
Construction:
Maximum Weight Capacity:
Maximum Tire PSI:
Warning:
The warnings, cautions and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must
be understood by the operator that COMMON SENSE AND CAUTION ARE
FACTORS WHICH CANNOT BE BUILT INTO THIS PRODUCT, BUT
MUST BE SUPPLIED BY THE OPERATOR.
The Operator
PLEASE REMEMBER:
Do not operate the product if under the influence of alcohol or drugs. Read warning labels on prescriptions to
determine if your judgment/reflexes might be impaired.
Do not wear loose clothing or jewelry as they can be caught in moving parts.
Protective gloves and non-skid footwear are recommended.
Only one person on the Go Cart at a time. Do not exceed the 165 Lb. maximum weight capacity.
The Go Cart is for Off-Road use only.
Maintain caution when turning. Avoid excessively sharp turns.
Only drive the Pedal Car - Go Cart during daylight hours when natural light conditions are good. Do not
drive at night.
An approved safety helmet must be worn at all times.
Use only under adult supervision.
#42822
Serial No.__________
Technical Specifications
Manual Pedal Car - Go Cart
42822
41-5/8"
30"
30"
4-1/2"
4.00-8" Pneumatic 30 PSI, Ball Bearing Mounted Hubs
14-1/2"
17-1/2"
58-1/4" x 36-1/8" x 30"
13"
34"
All Steel
165 LBS.
30
Purchase Date_____________
Page 2
Advertisement
