Advertisement
Connect Power
4A
Connect the neutral 120 volt power line wire to the
1
loose white fixture wire with a wire nut.
2
Connect the hot 120 volt power line wire to the loose
black fixture wire with a wire nut.
3
Connect the stranded copper wire to ground in
accordance with local electrical codes.
4
Refer to "Replacing the Lamps" on page 4 to replace the
lamps.
2
1
3
120 VOLT
POWER
LINE WIRES
Attach the Mirror
5A
SCREW
2
HINGE
2
Replace the lid onto the electrical box and tighten the
1
two screws.
2
Carefully attach the mirror onto the hinge and tighten
the two screws.
3
LID
1
1
SCREW
Advertisement
