Whirlpool CABRIO W10305227B Use & Care Manual page 6

Electronic dryer
Table of Contents

Advertisement

Available languages

Available languages

Select the correct cycle and dryness level or temperature for
your load. If an Automatic
Cycle is running, the display shows
the estimated cycle time when your dryer is automatically
sensing the dryness level of your load. If a Manual Cycle is
running, the display shows the exact number of minutes
remaining in the cycle.
Cool Down tumbles the load without heat during the last few
minutes of all cycles. Cool Down makes the loads easier to handle
and reduces wrinkling. The length of the Cool Down depends on
the load size and dryness level.
Drying tips
Follow care label directions when they are available.
If desired, add a fabric softener sheet. Follow package
instructions.
To reduce wrinkling, remove the load from the dryer as soon
as tumbling stops. This is especially important for permanent
press, knits, and synthetic fabrics.
Avoid drying heavy work clothes together with lighter fabrics.
This could cause overdrying of lighter fabrics and lead to
increased shrinkage or wrinkling.
Cycle tips
Dry most loads using the preset cycle settings.
Refer to the Automatic or Manual Cycle Settings chart (in the
"Cycles" section) for a guide to drying various loads.
Drying temperature and dryness level are preset when
you choose an Automatic Cycle. You can select a
different dryness level, depending on your load, by
pressing Dryness Level and choosing More, Normal,
Less, or Damp.
NOTE: Time adjust and changing Temperature setting is
not available with Automatic
Cycles. You cannot use the
Time Adjust and you cannot choose a Temperature with
the Automatic
Cycles.
If you wish to adjust the cycle length of a Manual Cycle,
press the Time Adjust up or down arrows. Adjust the
temperature of a Manual Cycle by pressing Temp until the
desired temperature is selected.
NOTE: You cannot choose a dryness level with Manual
Cycles. Changing the Dryness Level setting is not
available with Manual Cycles.
Select the drying cycle that matches the type of load you
are drying. See the Automatic, Steam, or Manual Cycle
Settings Charts.
Steam models
NORMAL
ECO NORMAL
BULKYITEMS
perm
press
CASUAL
HEAVY DUTY
o ton
Automatic
Cycles
TOWELS
DELICATE
Manual
Cydes
rIMED
DRY
ENHANCED
TOUCH UP
Non-Steam
models
ECO NORMAL
perm press
CASUAL
DELICATE
NORMAL
BULKY ITEMS
HEAVY DUTY
Automatic
Cycles
Manual
Cycles
TOUCH
QUICK
UP
DRY
DRY
Cycle Control knob
Automatic
Cycles
Automatic Cycles allow you to match the cycle to the load you are
drying. See the following Automatic Preset Cycle Settings chart.
Each cycle dries certain fabrics at the recommended
temperature.
A sensor detects the moisture in the load and automatically
adjusts the drying time for optimal drying.
NOTE: Not all cycles are available on all models.
Automatic
Preset Cycle Settings
Automatic Cycles
Temperature
Load Type
HEAVY DUTY
High
Heavyweight mixed loads, cottons,
and jeans
BULKY ITEMS
Medium
Blankets and comforters
NORMAL
Medium
Sturdy fabrics such as corduroys
and work clothes
ECO NORMAL
Medium
Designed for average size loads of
medium weight items
CASUAL
Low
Perm Press
No-iron fabrics, such as sports shirts,
casual business clothes, permanent
press, and synthetics
TOWELS
Cotton
Towels
High
DELICATE
Lingerie, blouses, or washable
knit fabrics
Extra-Low
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents