Dryer Use; Starting Your Dryer - Whirlpool 8578195 User Instructions

Load clothes loosely into the dryer. Do not pack the dryer. Allow space for clothes to tumble freely. The following charts show examples
of balanced loads that would allow for proper tumbling.
ULTRA CAPACITY, SUPER CAPACITY and SUPER CAPACITY PLUS DRYERS
Heavy Work Clothes
4 pair of pants
4 pair of jeans
2 sweatshirts
2 sweatpants
4 shirts

Starting Your Dryer

WARNING
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from dryer.
Do not dry anything that has ever had anything
flammable on it (even after washing).
Failure to follow these instructions can result in death,
explosion, or fire.
WARNING
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Items containing foam, rubber, or plastic must be dried
on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in death
or fire.
Before using your dryer, wipe the dryer drum with a damp cloth to
remove dust from storing and shipping.
4

DRYER USE

Loading
Mixed Load
3 sheets (1 king, 2 twin)
4 pillowcases
9 T-shirts
9 pair of shorts
3 blouses
10 handkerchiefs
3 shirts
Towels
10 bath towels
10 hand towels
14 washcloths
1 bath mat
1. Load clothes loosely into the dryer and close the door. Do not
pack the dryer. Allow space for clothes to tumble freely.
2. Turn the Temperature selector to the recommended setting for
the type of fabric being dried. See "Dryer Cycle Descriptions"
(separate sheet) for temperature suggestions.
3. Turn the Cycle Control knob to the cycle that corresponds
with the one you chose on the Temperature selector.
4. Your dryer has a WRINKLE SHIELD™ Plus feature selector.
When you are unable to remove a load from the dryer as soon
as it stops, wrinkles can form. This feature periodically
tumbles, rearranges and fluffs the load without heat to help
avoid wrinkling.
5. Your dryer has an END OF CYCLE SIGNAL. The signal is
helpful when drying items that should be removed from the
dryer as soon as it stops.
The End of Cycle signal is part of the Start button and is
selectable. Turn the PUSH TO START button to ON or OFF.
The signal will sound only if the selector is set to On.
6. Select the desired Option. See "Dryer Cycle Descriptions"
(separate sheet).
7. If desired, add fabric softener sheet. Use only ones labeled as
dryer safe. Follow package instructions.
8. Press the PUSH TO START button.
Stopping and Restarting
You can stop your dryer anytime during a cycle.
To stop your dryer
Open the dryer door or turn the Cycle Control knob to OFF.
NOTE: The Cycle Control knob should point to an Off area when
the dryer is not in use.
To restart your dryer
Close the door. Select a new cycle and temperature (if desired).
Press the PUSH TO START button.
Delicates
3 camisoles
1 robe
4 slips
8 undergarments
2 sets of sleepwear
1 child's outfit