Advertisement
XC-1A Quick Start Guide (1.0)
5.4 Button D: Simple UART Demo
A simple UART demonstration using the virtual COM port of the XC-1A. Once you
have started the program, connect to it using a standard terminal (such as realTerm
for Windows or GTKTerm for Linux). When you press a key, a list of three commands
is displayed that you can use to illuminate the clock LEDs via the terminal. The UART
settings are as follows:
Press A to return to the default LED demo.
Disclaimer
XMOS Ltd. is the owner or licensee of this design, code, or Information (collectively,
the "Information") and is providing it to you "AS IS" with no warranty of any kind,
express or implied and shall have no liability in relation to its use. XMOS Ltd. makes
no representation that the Information, or any particular implementation thereof, is
or will be free from any claims of infringement and again, shall have no liability in
relation to any such claims.
Copyright ©2009 XMOS Ltd. All Rights Reserved. XMOS and the XMOS logo are
registered trademarks of XMOS Ltd in the United Kingdom and other countries,
and may not be used without written permission. Company and product names
mentioned in this document are the trademarks or registered trademarks of their
respective owners. Where those designations appear in this document, and XMOS
was aware of a trademark claim, the designations have been printed with initial
capital letters or in all capitals.
Bits per sec
115200
Parity
None
Data bits
8
Stop bits
1
Flow control
None
www.xmos.com
7/7
Advertisement
