Advertisement
XC-1A Quick Start Guide (1.0)
3 Mac OSX Users
1. Connect the XC-1A card to your system
Connect the XC-1A card to your development system using the USB cable
provided.
The XC-1A card starts up and flashes the LEDs around the XMOS chip on the
card. The XC-1A card has four demonstrations which you can launch using
the push buttons—see Section 5.
2. Download and configure the XMOS Tools
Download the Macintosh installer from the following URL:
http://www.xmos.com/downloads
Double-click the downloaded installer to open it, and then drag the XMOS
icon into your Applications folder.
The installer copies the files to your hard disk.
Unmount the installer.
3. Start the tools
To start the integrated development environment, open a new Finder window,
navigate to the Applications folder, open the XMOS folder and double-click
on the XDE.app icon.
To use the command-line tools, open a Terminal window, change to the
installation directory and type:
SetEnv.command
You are now ready to follow the XC-1A tutorial which explains how to write XC
programs for your XC-1A board. Download the tutorial from
http://www.xmos.com/published/xc1atut.
www.xmos.com
4/7
Advertisement
