Start To Use; Power On/Off - Philips Voice Tracer VTR5800 User Manual

4 Start to use

4.1 Power on/off

Note
Recharge the device for three hours before using it for
•
the first time!
1 Slide the Power/Hold switch on the side of the device
downwards for approximately two seconds.
» The device turns on and the start-up screen is
displayed.
» Then the device displays the stopped playback
interface.
30 EN
Press MENU button for 2 or 3 seconds to return to the
main interface. The main interface includes four modes. The
following four pictures show the modes respectively: Music,
Record, Radio and Settings.
2 To power off, pull down the Power/Hold switch on the
side of the device again and hold for about two seconds.
Note
If the device cannot work normally, please make sure the
•
device is not out of power.
When the battery indicator "
•
charge the device promptly.
" is displayed, please