Download Print this page
Technaxx TX-76+ User Manual

Technaxx TX-76+ User Manual

Desk clock with pir & fullhd camera

Advertisement

Quick Links

Desk Clock with PIR & FullHD Camera TX-76+
The Declaration of Conformity for this device is under the Internet link: www.technaxx.de/
(in bottom bar "Konformitätserklärung"). Before using the device the first time, read the user
Service phone No. for technical support: 01805 012643 (14 cent/minute from German
fixed-line and 42 cent/minute from mobile networks). Free Email: support@technaxx.de
IMPORTANT HINTS: Before the first use make sure you have charged the device.
Only use battery type 18650 lithium-ion which is included in package contents. For
other batteries we do not overtake any guarantee. Insert a MicroSD card first,
otherwise the function of the described indicator lights does not fit the description.
Keep this user manual for future reference or product sharing carefully. Do the same with
the original accessories for this product. In case of warranty, please contact the dealer or
the store where you bought this product.
Enjoy your product * Share your experience and opinion on one of the
Features
Digital desk clock with PIR & built-in FullHD camera
surveillance
Digital time display also while recording
(alarm clock)
36 IR LED for night vision up to ~6–8m
Temperature & date display
Note: This device supports VGA/1080p video. Use high speed memory card
because video file size with 15 seconds recording are up to 30–70MB big.
With FullHD video recording on MicroSD 32GB you can store ~1 hour of
footage.
With VGA video recording on MicroSD 32GB you can store in ~4.5
hours of footage.
Please notice that this will not be a permanently recording! It is just the
amount of time that can be saved on MicroSD with 32GB.
Technaxx
manual carefully.
well-known internet portals.
Video recording with sound by motion detection (PIR ~8m)
®
* User Manual
Anti-scratch shell & anti-slippery rubber foot
Warranty 2 years
Home and office
Set up 2 alarm times
Recording while charging

Advertisement

loading

Summary of Contents for Technaxx TX-76+

  • Page 1 * User Manual Desk Clock with PIR & FullHD Camera TX-76+ The Declaration of Conformity for this device is under the Internet link: www.technaxx.de/ (in bottom bar “Konformitätserklärung”). Before using the device the first time, read the user manual carefully.
  • Page 2: Technical Specifications

    Cleaning: Protect the device from contamination and pollution (use a clean drapery). Avoid using rough, coarse-grained materials or solvents/aggressive cleaner. Wipe the cleaned device accurately. Distributor: Technaxx Deutschland GmbH & Co.KG, Kruppstr. 105, 60388 Frankfurt a.M., Germany...
  • Page 3 Product overview Front side Camera LED screen PIR sensor Set up functions of clock. Set up time & date & alarms. Set up time & date & DOWN alarms. Control screen ON/OFF. Reset: time, date & alarm from clock Rear side Open here (back cover) Battery compartment (Battery type 18650)
  • Page 4: Insert The Memory Card

    Insert & charge the batteries Open the back cover of the device. Install the batteries (type: 18650 2000mAh 3.7V) and ensure their correct polarity. After that, close the battery compartment cover by replacing the back cover. To charge the batteries, use the attached Micro USB cable.
  • Page 5 Under time mode Fahrenheit Press UP to choose the temperature Celsius format: Fahrenheit (°F) or Celsius (°C). Press DOWN once/twice to check Alarm ON ON/OFF of alarm one/two. Press V/S to change from screen steady Alarm OFF ON (ON:SD) to screen auto off (–:SD). Screen steady on When the screen is off, slightly knock on the...
  • Page 6: Use Of The Device

    Use of the device Open back cover, insert MicroSD card. Note: If no MicroSD card is inserted or the MicroSD card cannot read, the Indicator LED 3 will be steady on. Switch & indicator LED description Motion detection video recording Set switch 3 to V and set switch 2 to VGA (640x480) or FHD (1920x1080) to choose video resolution, then set switch 1 to MD (LED 2 / BLUE light flashes 6x then off).
  • Page 7 Loop recording If the memory card is full, the first videos will be deleted automatically and recording will be continued. Connecting with PC Set switch 1 in middle, connect it with PC using USB cable. Then set switch 1 to OFF and camera will be recognized as a removable Disk Drive.
  • Page 8 Windows: Step USB drive/storage (F:) CD drive (E:) Date/Time Set 0 Bytes free of 724 KB MacOS: Step CD drive “Date/Time Set” USB drive/storage “NO NAME” Warnings Do not attempt to disassemble the device, it may result in short-circuit or even damage.