Page 1
The Declaration of Conformity for this device is under the Internet link: www.technaxx.de/ (in bottom bar “Konformitätserklärung”). Before using the device the first time, please read the user manual carefully. This device has a rechargeable battery. It must be fully charged before first use.
Do not disposal old devices or batteries into the domestic waste. Cleaning: Protect the device from contamination and pollution (use a clean drapery). Avoid using rough, coarse-grained materials or solvents/aggressive cleaner. Wipe the cleaned device accurately. Distributor: Technaxx Deutschland GmbH & Co.KG, Kruppstr. 105, 60388 Frankfurt a.M., Germany...
Product overview Camera = Video camera 1 Time adjustment 5 Reset 2 LED indicator 6 MicroSD card slot 3 Power on/off 7 DC 5V charging 4 USB port for PC and charge with hidden microphone...
Page 4
USB Charging Connect the clock to a computer with the included USB cable RED light turns on. It takes approx. 5 hours until the 1000mA battery is fully charged. DC 5V Charging Connect the clock to a socket with the included DC cable RED light turns on.
Connection to PC Connect the camera to a PC with the USB cable after connection a disk named “Movable Disk” is shown on the PC screen In case you cannot open the “Movable Disk”, check if the SD card is plugged inside. In case the PC cannot detect the clock’s camera, check if USB port on PC maybe is too loose and/or try another USB port.
Need help?
Do you have a question about the 4219 and is the answer not in the manual?
Questions and answers