Danfoss EKC 3 Series Instructions page 4

PC software for creating
EKC1xx setting files -
included with PC software
for programming EKC's
…‚t…h€€vtÃ
‡h…tr‡)Ã@F8 ‘‘
Fixture and PC-cable for
termination – 084B7706*
* Fixture/termination module includes power supply for EKC operating with 12/24V a.c.
Power for EKC's operating with other supply voltages is not supplied via programming tool.
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to
products already on order provided that such alternations can be made without subsequential changes being necessary in specifications already agreed.
All trademarks in this material are property of the respecitve companies. Danfoss and Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
4
Overview
EKC101 and EKC201/301 programming software
EKC101
Create setting file
Instructions RI.8B.T3.02 © Danfoss 12/2002
EKC2/3/4xx
Create setting file
9D
T!"! 9D!
6I7VTT 6F6! D ÃÃ D!
LON
. 
QSDIU@S ST!"!
ÃÃÃÃG PÃ ÃÃÃÃÃÃÃÃ PÃ!ÃÃÃÃÃÃÃÃ D
PI 9DÃ
9PÃ!
9PÃ
EKC201C EKC2xx EKC3/4/5xx
PC software for programming EKC's –
0847701 (1 license) / 084B7702 (5 license)
PC software for creating setting files for
EKC2/3/4xx (AKM) –
084B4012 (1 license) / 084B4016 (5
license)
AKA243A – 084B2265 (IC12 and
IC13 must be exchanged with new IC's
supplied with termination module)
Termination module – 084B7703/4/5*
…‚t…h€€vtÇh…tr‡  @F8!"#‘‘
EKC programming tool