Light4Me LED ZOOM PAR 64 200W COB ZOOM User Manual page 3

2.3 AC Power
The fixture is designed to work on AC 100V - 240V 50-60Hz. All units must be
powered directly from a switched circuit.
Warning!!! All fixtures must be connected to circuits with a suitable Earth Ground.
3. OPERATION INSTRUCTIONS
3.1 Control Panel
MENU UP DOWN ENTER
3.2 Menu Map
Main Level
d001
CH03
Au01
St00
SP01
Sn01
u000
H000
rESt
MENU: To scroll over main menu
UP: To increase the value.
DOWN: To decrease the value.
ENTER: To enter certain menu or confirm setting
Programming Levels
d001-d512
CH03/07
Auto01
Auto02
So01
So02
St00-St16
SP01-SP16
Sn01-Sn16
u000-u255
H000-H255
Description
Set DMX address 001-512
Select 3 channels or 7 channels
Select auto program 01/02 or sound
program 01/02 to run the fixture
Set strobe speed from slow to fast
Set Auto program speed from slow to fast
Set sound sensitivity level from lowest to highest
Manual control of light output from 0-100%
Manual control of zoom from 15°-50°
Reset motor
3