Diskette Configuration Submenu; Event Log Configuration Submenu - Dell Dimension 4200 Manual

Option Function
Drive Installed Displays the primary IDE device type.
Type Specifies the type of hard drive. Settings for this option are User, Auto, CD-ROM, ATAPI Removable,
Other ATAPI, IDE Removable, and None.
Maximum Displays the maximum capacity of the primary IDE device.
Capacity
LBA Mode Control Displays whether LBA mode control is enabled or not on the primary IDE device.
Multi-Sector Displays the multi-sector transfer setting of the primary IDE device.
Transfers
PIO Mode Displays the PIO mode setting of the primary IDE device.
Ultra DMA Displays the ultra DMA setting of the primary IDE device.
Cable Detected Displays the type of cable connected to the primary IDE device.

Diskette Configuration Submenu

Option Function
Diskette Configures the floppy drive interface. Options are Enabled (default) and Disabled.
Controller
Diskette A Selects the floppy drive type from Not Installed, 360 KB 5 1/4", 1.2 MB 5 1/4", 720 KB 3 1/2",
1.44/1.25 MB 3 1/2", or 2.88 MB 3 1/2".
Diskette Write Protects a floppy disk from being written to when set to Enabled. When this option is set to Disabled
Protect (default), the floppy disk is not protected unless the write-protect tab is in place.

Event Log Configuration Submenu