Operation - Klarstein 10030288 Manual

Starting the refrigerator
After connecting to the power supply, turn the temperature controller clockwise from position 0 to any posi-
tion between 1 and 7 to start the refrigerator. The refrigerator compressor will stop when the temperature
controller is at position 0.
Adjusting the temperature
The temperature inside the refrigerator is adjusted by turning the temperature controller. Positions 1 to 7
represent different temperatures from the lowest to the highest.
Position
0
1-2
3-4
4-5
6-7
Instructions for heater switch
In winter, when the room temperature is below 10 °C ,
to make the refrigerator achieve good cooling effect, set
the switch to "ON" position (with the "-" sign side down).
When the room temperature is above 10 °C, tplease dial
the switch to the "OFF" position in time,so that it can save
energy.
When you need fast cooling, set the switch to the "ON"
position (with the "-" sign side down). fast cooling is not re-
quired, set the switch to the "OFF" position,
When the standard test refrigeration capacity, the switch must be placed in the "ON" position.
Notes
Some time will be required for the refrigerator to reach the set level when temperature adjustments are
made. The length of this period is determined by difference in the existing and set temperatures, the ambient
temperature, the frequency with which the door is opened and closed and the amount of food in storage.
Loading the refrigerator with food
When the refrigerator is switched on, do not load food until 1~2 hours have passed. Usually, food for cold
storage or deep freezing can be loaded when the temperature inside the compartment reaches the set point.

Operation

Conditions
OFF
Summer or ambient temperature between 25-35 °C.
Spring, autumn or ambient temperature between 15-25 °C.
Winter, or ambient temperature between 5-15 °C.
Quick freeze
heater switch
20