Transport And Installation - Klarstein 10030288 Manual

• Make sure the refrigerator is kept upright during handling. If an inclination is required, it should not exceed
45 degrees. Otherwise the appliance may get damaged resulting not only in compromised refrigeration
performance.
• To avoid product damage or personal injury, the refrigerator should be unpacked by two persons after it is
located in a previously selected position.
• Remove all packing materials.
• Checking should be conducted with reference to the Packing List. Contact the local distributor if discrepan-
cies are found.
• Before installation, make sure the refrigerator has no visible exterior damage.
• When handling the refrigerator, do not lift it by holding the worktop, to prevent any damage to the refrig-
erator.
• Do not start up a refrigerator that is damaged.
• Install the refrigerator in a well-ventilated place.
• Clean the refrigerator before use. (See the section "Cleaning")
• After the refrigerator has been sited and cleaned, let it stand for more than 30 minutes before connecting
the power source.
19

Transport and Installation