Plc Controller (Option); Automatic Operation; Continous Flush; Fault - Uvar UDI 6Matic 706M002 Maintenance Manual

Maintenance Manual - 6Matic.

7 - PLC CONTROLLER (OPTION)

When operational, the filter will be in one of the following modes.

7.1 - Automatic operation

The filter will perform a flushing cycle after time interval that is preset in the flushing controller or the filter will perform
a flushing cycle due to the pressure differential switch command (D.P.), whichever is first.
If the pressure differential remains on, the filter will continue its flushing, read chapter 10 "Trouble shooting".

7.2 - Continous flush

In this mode the filter will flush continuously.

7.3 - Fault

The fault condition (RED light on) is generated in case of a motor fault.
UDI 5-3-2020
14