Appendix A: Software Utility for VMD 2003
5. Supply Voltage
Shows the value of input voltage.
6. Backlight Mode
Auto or Manual mode can be selected to control the backlight.
If Auto is selected (default), the backlight can be adjusted automatically by
the light sensor.
7. Panel Brightness
If Manual mode is selected in Backlight Mode, the backlight can be adjusted
(1~10 level) manually by moving the bar.
8. Audio Volume
The audio volume can be adjusted by moving the bar.
Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved.
9. Control Mode
The Control Mode is defined for showing camera content or PC content
automatically or manually. The default setting is Auto.
Manual Mode
Users can select the video content from the function of Video Input.
Auto Mode
The default video content is from PC. When any of the camera powers on,
the image on VMD 2003 will change to the corresponding camera. If there
are more than one camera powering on, the image on VMD 2003 will show
the first number. For example, the priority of CVBS 1 is higher than CVBS 2,
therefore, the video content of CVBS 1 will be shown.
10. Video Input
If Control Mode is set to Manual mode, video input can be selected
manually, such as camera 1 (CVBS 1), camera 2 (CVBS 2), camera 3 (CVBS
3) or camera 4 (CVBS 4). If LVDS is selected, the video input is from PC.
11
VMD 2003 User Manual