Battery Installation - Fisher-Price Direct Link Privacy Monitor Manual

D
The transmitter and receiver operate with either the AC adaptors included
1.5 V x 4
+
"C" (LR6)
Both Shown Actual Size
Receiver
• Locate the battery compartment door on the back of
the receiver.
• Push the battery compartment door in the direction of
the arrow to open.
• Snap the terminals of a fresh 9 volt alkaline battery into
the connectors.
• Close the battery compartment door.

Battery Installation

with your Direct Link Privacy Monitor
9V
(6LR61)
-
Battery Compartment Door
9V Alkaline
Battery
™ or by battery power.
Four Size "C"
Alkaline Batteries
Transmitter
• Locate the battery compartment door on the back of
the transmitter.
• Push the battery compartment door in the direction of
the arrow to open.
• Insert four, fresh size "C" alkaline batteries as shown
inside the battery compartment.
• Close the battery compartment.
Please Note:
• Do not mix old and new batteries.
• Do not mix different types of batteries: alkaline, standard
(carbon-zinc) or rechargeable (nickel-cadmium).
• Remove batteries during long periods of non-use.
Always remove exhausted batteries from the product.
Battery leakage and corrosion can damage the product.
• Never short circuit the battery terminals.
• Non-rechargeable batteries are not to be recharged.
• Only batteries of the same or equivalent type as
recommended in the "Battery Installation" instructions
are to be used.
• If removable rechargeable batteries are used, they are
only to be charged under adult supervision.
• Rechargeable batteries are to be removed from the
product before they are charged.
• If you use a battery charger, it should be examined
regularly for damage to the cord, plug, enclosure and
other parts. Do not use a damaged battery charger until
it has been properly repaired.
4
Battery
Compartment
Door