Problems And Solutions Guide - Fisher-Price Direct Link Privacy Monitor Manual

L
IMPORTANT! If you have a problem with the Direct Link Privacy Monitor
Problems and Solutions Guide. If you still experience a problem with the Direct Link Privacy Monitor
please call Fisher-Price
PROBLEM
Transmitter power
indicator does not light
Receiver power
indicator does not light
No sound

Problems and Solutions Guide

®
PROBABLE CAUSE
Transmitter not turned "ON"
Power is turned "OFF"
AC adaptor not properly connected
AC adaptor problem
Weak or dead batteries
Receiver not turned "ON"
Power is turned "OFF"
AC adaptor not properly connected
AC adaptor problem
Weak or dead battery
Channel switches not on same setting
(channel)
Signal interference due to monitors,
cordless telephones, etc.
Out of range or insufficient signal
Volume not turned up
Improper antenna position
Weak or dead batteries
AC adaptor not properly connected
Consumer Affairs at 1-800-432-KIDS.
Turn the transmitter "ON".
Make sure that any light switches that control power flow to
the wall outlet are "ON".
Make sure house fuses and circuit breakers are "ON".
Check AC adaptor jack-to-socket and plug-to-outlet connections.
Test the transmitter using the other AC adaptor included with this
product. If the transmitter works with the other AC adaptor,
contact Fisher-Price
Replace the batteries in the transmitter with four fresh size "C"
alkaline batteries or use AC adaptor.
Turn the receiver "ON".
Make sure that any light switches that control power flow to the
wall outlet are "ON".
Make sure house fuses and circuit breakers are "ON".
Check AC adaptor jack-to-socket and plug-to-outlet connections.
Test the transmitter using the other AC adaptor included with this
product. If the transmitter works with the other AC adaptor,
contact Fisher-Price
Replace the battery in the receiver with a fresh 9v alkaline
battery or use the AC adaptor.
Set channel switch on transmitter and receiver to the same
channel.
Change the channel setting on both the transmitter and the
receiver.
Identify and eliminate the source of interference.
Test reception by moving the transmitter and/or receiver to
different locations throughout the house. Relocate the
transmitter and/or receiver.
Test reception by moving the transmitter and/or receiver to
different locations throughout the house. Relocate the
transmitter and/or receiver.
Adjust volume control on receiver.
Make sure the antenna on the transmitter and receiver are
pointing upward.
Replace the battery in the receiver with a fresh 9V alkaline
battery, and the batteries in the transmitter with four size "C"
alkaline batteries or use the AC adaptors.
Check AC adaptor jack-to-socket and plug-to-outlet connections.
10
™ , first check the
SOLUTION
® to replace the broken AC adaptor.
® to replace the broken AC adaptor.
™ ,