Fluke IRCON ScanIR3 Operating Instructions Manual page 26

Linescanner
Table of Contents

Advertisement

Installation
The Earth Ground wire should be slightly longer than the two other wires so if the cable is
accidentally pulled the line and neutral wires are disconnected first.
You need to connect the AC mains. Use only cable with 3 wires in a size of 1.5 to 2.5 mm² (AWG 14 to
16).
An external 6 to 16 A line fuse (type B) or an equivalent circuit breaker is required for
the AC mains installation.
26
Terminal
X1
Pin
L1
N
Figure 13: AC Mains Cable
Rev. A1 Mar 2015
PE
ScanIR3

Advertisement

Table of Contents
loading

Table of Contents