Installation Requirements; Electrical Requirements; Location Requirements; Air Purifier Use - Whirlpool Whispure Whispure Air Purifier Use & Care Manual

Whirlpool gold whispure air purifier use and care guide
Hide thumbs


Table of Contents

Electrical Requirements

Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
Electrical Connection
To properly install your air purifier, you must determine the type of
electrical connection you will be using and follow the instructions
provided for it here.
NOTE: Before operating the air purifier, record the date of installation on the HEPA filter. Under normal conditions, the HEPA filter should
be replaced annually, and the pre-filter should be replaced every 3 months. To remove and replace either filter, see "Filter Replacement"
in the "Air Purifier Care" section.



The air purifier should be connected to a 115 V, 60 Hz, 15- or
20-amp fused 3 prong grounded outlet.
The use of a time-delay fuse or time-delay circuit breaker is

Location Requirements

A. 6" (15.2 cm) min. clearance
You will need a level surface at least 6" (15.2 cm) from heat
sources such as ranges or heaters.
Do not block air openings or place the air purifier on a soft
surface such as a bed or sofa.
Operate indoors only.

Hide quick links:


Table of Contents

This manual is also suitable for:

1188695Gold whispure 510

Table of Contents