Initial Setup (Quickstart) - X-Fusion Velvet R 2008 Owner's Manual

Initial Setup (quickstart)

Your VELVET R is simple to use and setup. X-Fusion recommends that you consult the AIR
PRESSURE SETTINGS TABLE on the next page and fill the air chamber with the air pressure
corresponding to your body weight, and set the REBOUND knob to 6 clicks IN from FULL
OPEN.
Ride your bike around a little bit and let the VELVET R take in a few bumps and hits before
commencing adjustment. This allows the oil, seals and other systems to get primed, get
adjusted, and prepare for world-dominating performance.
Air Pressure Settings Table
Rider Weight in lbs. (kg)
< 155 lbs. (< 70)
155 - 170 (70 - 77)
170 - 185 (77 - 84)
185 - 200 (84 - 91)
200 - 215 (91 - 97)
215 - 230 (97 - 104)
230 - 245 (104 - 111)
245 - 260 (111 - 118)
260 > (118 >)
For every 15 lbs. (7 kg)...
Pressure Setting in psi (bar)
70 (4,83)
Add 5 psi (0,34 bar) up to a maximum of 300
psi (20,68 bar)
75
80
85
90
95
100
105
110
7