Setting Rebound - X-Fusion Velvet R 2008 Owner's Manual

If you have more than 30mm of sag, you might need to ADD air to the air chamber;
4.
if you have less than 30mm of sag, you might need to REMOVE air from the air
chamber.
Sag is determined by rider weight, and is adjusted by setting the pressure in the air chamber
on the left leg of the VELVET R. Using an X-Fusion High Pressure Pump, you either add or
remove air to obtain the correct pressure setting, and thus sag.

Setting Rebound

Rebound damping controls the speed at which a fork returns after being compressed.
Located at the top of the right fork leg is the rebound knob. Turning the knob clockwise
(OUT) decreases rebound damping, causing the fork to return to full extension faster.
Turning the knob counterclockwise (IN) increases rebound damping, slowing the return of
the fork to full extension.
The VELVET R has 16 to 20 clicks of adjustment from full OUT to full IN.
X-Fusion cannot tell you what the "correct" rebound setting is. Rebound is a personal
preference. X-Fusion recommends that you play around with your rebound settings to find
a setting you like.
10
SLOWER (CW)
FASTER (CCW)