ASSEMBLED FOIL SYSTEM
4
ASSEMBLED FOIL SYSTEM
Shown: Naish Foil Complete–Abracadabra
REQUIRED TOOLS & HARDWARE
ASSEMBLY TOOL
Torx T30 Screw Driver
REQUIRED HARDWARE
Attach the Base to the Board Using:
Abracadabra Plate
(4) M6 30 mm
Stainless Steel Torx Screws
Stainless Steel Torx Screws
Attach the Base to the Mast Using:
Titanium Mast Screws
Attach the Mast to the Fuselage Using:
Stainless Steel Mast Screws
Attach the Front Wing to the Fuselage Using:
Titanium Wing Screws
Attach the Adjustable Stabilizer Foil (rear wing)
to the Fuselage Using:
(2) M6 Torx 20 mm Titanium Screws
REQUIRED TOOLS & HARDWARE
Standard Plate
(4) M6 Stainless Steel
(4) M6 25 mm
T-nuts
(3) M6 Torx 30 mm
(3) M6 Torx 30 mm
(3) M6 Torx 20 mm
naishfoils.com
5