Operations - OPTITEC Wireless Remote Control Wheel V3 Operator's Manual

4.

Operations

Before commencing any operation of Optitec Wireless Remote Control
1.
Wheel, ensure that the caravan or trailer is on a level, even, firm surface and there is
no risk of it moving towards a slope that could allow it to roll uncontrolled.
Optitec Wireless Remote Control Wheel although it may do so very well, is
2.
not specifically designed to move a caravan or trailer on sand, gravel, soft soil &
grass, wet surfaces or rough, uneven ground. It is the responsibility of the Operator to
determine individual situations and operational ability.
Sufficient down force must be applied to Optitec Wireless Remote Control
3.
Wheel to ensure adequate traction in order to move the caravan or trailer safely and
accurately. Be aware of your caravan weight distribution characteristics.
Release the caravan or trailer hand-brake prior to operation. Using Optitec Wireless
4.
Remote Control Wheel Remote Control Unit, turn 'on' power with button (#2). A
'Beep'
will sound. The caravan or trailer can now be moved by pressing the buttons
on Remote Control Unit as indicated – forward (#4), backward (#5), left (#6) and right
LED will light only whilst a button is pressed
(#7). The
power to the machine. Power will automatically shut off after 15 minutes of inactivity.
Whilst moving the caravan or trailer, it is advisable to ensure the handbrake is
5.
easily accessible in case it is required. It is recommended that an observer assist with
the operation to ensure there is no risk of collision with objects or danger to people
during the movement. If an over-current situation occurs, the motor will stop and a
continuous 'beep' will sound. Press the 'Off' button to reset the machine.
Use remote control with a quick momentary button press to check the operation
6.
and direction of wheel rotation to orientate the Forward and Reverse buttons with the
expected direction of travel of the Optitec Wireless Remote Control Wheel before
attempting to carry out full manoeuvring operation.
Once the caravan or trailer is parked in the desired position, Optitec Wireless
7.
Remote Control Wheel can be used in the same manner as a standard support
wheel (see Safety Note), however it is recommended that it not be exposed to the
weather for extended periods.
Using remote control unit, turn 'off' power (#9) and disconnect the power supply as
8.
soon as the caravan or trailer is parked to avoid accidental operation.
Apply the caravan or trailer parking brakes securely and use wheel chocks.
9.
and is not an indication of
7