Positioning The Paper; Turning On The Slice - Making Memories Slice Manual

STEP 3

Positioning the paper

To position the paper on the mat:
1. Place the paper directly on the cutting mat after the adhesive has dried.
2. Make sure the desired side of paper is facing up.
3. Gently smooth the paper across the cutting mat with your hand
or with the Slice™ Brayer (sold separately).
4. Make sure the paper is completely flat.
STEP 4

Turning on the Slice™

To turn on the Slice™ design cutter:
1. Push small button on back panel as shown below.
2. The Slice™ screen illuminates on the top of the unit as shown below.
3. Remove the protective cover from the base.
Note: The unit shuts off automatically after approximately 15 minutes when not in use,
whether it is plugged in or not.
Step 4 #1
ENGLISH
BASIC OPERATIONS
Please
Insert
Design
Card
MENU
SELECT
Step 4 #2
11