Advertisement
Quick Links
Elite Nexus Freestanding & Adhesive Mount
Getting started guide
1. Unlock case with keys
2. Feed cable through the
3. Place faceplate back on
4. Wipe base of stand and your
5. Stick 3M adhesive to the
provided and remove
stand and plug in your tablet
and lock. Follow steps 4-6 for
mounting surface with alcohol
base of stand and firmly
faceplate.
while placing it into the case.
adhesive mount instructions
wipes provided and let dry.
place down on your mounting
surface.
Optional Cable Cutout
Optional Position Lock
6. Let the stand sit for 24
hours before use.
Unscrew existing closed cable cutout and install
Rotate stand 45 degrees so cable hole is on the
the open cable cutout included with stand.
left, then screw in lock screw as shown. This will
lock the rotation for a fixed option.
DESIGNED FOR DIGITAL USE ONLY
Advertisement
Related Manuals for Bosstab Elite Nexus
Summary of Contents for Bosstab Elite Nexus
- Page 1 Elite Nexus Freestanding & Adhesive Mount Getting started guide 1. Unlock case with keys 2. Feed cable through the 3. Place faceplate back on 4. Wipe base of stand and your 5. Stick 3M adhesive to the provided and remove stand and plug in your tablet and lock.
- Page 2 Elite Nexus Screw Mount Getting started guide TOP VIEW Screw base holes Cable feed hole 1. Remove screws from case 2. Follow the above locations 3. Drill pilot holes to assist with 4. If you are running your 5. With the cable channel facing and lift the case off the stand.
Need help?
Do you have a question about the Elite Nexus and is the answer not in the manual?
Questions and answers