Replacing The Sim Card - Orbic Speed RC400L User Manual

CAUTION!
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries in accordance
with local regulations. Risk of fire and burns. Do not open, crush, heat above 60
Follow manufacturer's instructions.
WARNING!
Always use only approved batteries and chargers with your Mobile Hotspot.
The warranty does not cover damage caused by non-approved batteries and/or chargers.
IMPORTANT!
Whenever you remove or insert the battery, ensure your Mobile Hotspot is not connected to any device
or power source. Never use tools, knives, keys, pens or any type of object to force the door open or
to remove the battery. Using any of these types of objects could result in puncturing the battery.
Replacing the 4G LTE SIM Card
Your SIM (Subscriber Identity Module) card is a small rectangular plastic card that stores
your phone number and important information about your wireless service.
Your Mobile Hotspot comes with the SIM card already installed.
To remove the 4G LTE SIM card:
Remove cover using the cutout on the back cover.
1
Remove the battery.
2
Carefully slide the latch of the SIM tray to the right to take out the SIM card.
3
Place new SIM card into the slot and slide latch to the left to lock it in place.
CAUTION!
Do not bend or scratch your SIM card. Avoid exposing your SIM card to static electricity, water, or dirt.
11
C or incinerate.
0