Osmond Ergonomics AXIA OFFICE Instructions

AXIA OFFICE, AXIA MAX & AXIA PLUS - INSTRUCTIONS

1. SEAT HEIGHT

Lift the middle lever on the right or
left-hand side and take your weight
off the seat to raise the height.
Remain seated to lower the height.
Release the lever to lock the seat
height.

4. FREE FLOAT TENSION

Twist the knob on the underside of
the chair while in free float mode to
adjust the tension of the rocking
motion. Clockwise increases the
tension, anticlockwise reduces the
tension.

2. BACK ANGLE

Lift the back lever on the right or left
hand side and take your weight off
the back to bring it forward. Lean
back to move it backwards. Release
the lever to lock the back angle.
5. BACK HEIGHT
(AXIA OFFICE ONLY)
Pull out the lever on the middle of the
back to release the back height lock,
then raise or lower the back. Push the
lever back in to lock the back height.
3. SEAT TILT &
FREE FLOAT ACTIVATION
Lift the front lever on the right or
left-hand side to release the seat tilt
lock. Tilt the seat while seated.
Release the lever to lock the seat
tilt. Or push down the front lever to
activate the seat rock. Lift the lever
back up to lock the seat in any
position.
6. LUMBAR SUPPORT
(MAX ONLY)
Turn the knob on the right-hand side
of the back to adjust the lumbar
support. Clockwise increases lumbar
support, anti-clockwise decreases
lumbar support.