Maxcom MM-820 Manual page 14

Textinput
Text is entered by pressing the numerical keys repeatedly to select characters .
When writing SMS messages in some languages you can use the Smart ABC
(eZiType™) input method which uses a dictionary to suggest words .
See Settings on how to change input method .
Enteringtext
Press the key repeatedly until the desired character is shown . Wait a few seconds
before entering the next character .Press * for a list of special characters .Select
the desired character and press OK to enter it .Use the side keys +/– or
/ to move the cursor within the text .
Press # to cycle upper case, lower case and numerals .
EnteringtextwithSmartABC
Press eachkey once, even if the displayed character is not the one you want . The
dictionary will suggest words based on the keys you have pressed . Use the arrow
keys to select a word, then press OK and continue with the next word .
If none of the suggested words are correct, press # to change to manual input
mode . The icon on the top left of the display indicates the input mode:
eZi.ABC UPPER CASE with SmartABC
eZi.abc lower case with SmartABC
ABC UPPER CASE
abc lower case
123 Numerals
FM Radio
This unit can receive the frequency ranges from 87.5 to 108.0 Mhz.
Note: Pls use the earphone when turn on the FM radio. The earphone cord is the
FM antenna
Turn on the FM radio
1.Insert the Earphone to the phone
2.Enter the main menu, select the FM Radio and press OK.Now the FM is turning
on. It will show the FM frequency ranges. You can adjust the volumn by the side
keys UP & Down
". FM radio is still working
3.Go back to the main menu by pressing"
Select the FM station by hand setting
1.Use the navigation keys up and down to go for the FM frequency you want
2.Press Options and store the stations
Auto search function
1Enter the menu FM radio
2.Select Options