Quick Start Setup - iHome Control SMARTPLUG iSP100 Quick Start Manual

Quick Start Setup

1
Download and open the
1
Plug the SmartPlug into a desired outlet*. The
2
it is ready for setup.
Tap Add Device ... in the Devices tab and follow the on-screen directions to
3
complete setup.
When prompted, scan or type the Accessory Setup Code below:
4
Success! You should now be able to toggle your SmartPlugs
5
iHome Control app or by using Siri
* When used outdoors, must be plugged into GFCI outlet ONLY.
iHome Control app from the App Store or Google Play.
NOTE: When typing, dashes are not required
.
®
LED will start blinking to indicate
ON OFF
or from the